Machine Tools > Technical Specifications

Technical Data
Concept Turn 55-II
Concept Turn 105
Concept Turn 155
Concept Turn 450
Working Area
Distance between centres
335mm (13.19")
236mm (9.29")
405mm (15.94")
700mm (27.56")
Swing over bed
130mm (5.12")
180mm (7.09")
250mm (9.84")
430mm (16.3")
Traverse paths X/Z
48/236mm(1.9/9.3")
55/172mm(2.1/6.7")
100/300mm(3.9/11.8")
160/310mm(6.3/12.2")
Max.workpiece size(*)
ø52mm(ø2.05")
ø75mm(ø2.95")
ø85mm(ø3.35")
ø220mm(ø8.66")
Max. turning length (note1)
215mm (8.46")
121mm (4.76")
245mm (9.65")
510mm (20.08")
Main Spindle
Spindle Bore
ø16mm(ø0.63")
ø20.5mm (ø0.81")
ø20.5mm (ø0.81")
ø45.5mm (ø1.79")
Bearing diameter
groove typeø30mm
taper typeø45mm
taper typeø45mm
spindle type ø80mm
Main drive

AsynchronousAC motor
0.75kW(1.01hp)
1.9kW(2.55hp)
2.8kW(3.75hp)
13kW(17.43hp)
Speed range
120-4000rpm
150-4000rpm
150-4000rpm
0-6300rpm
Feed drives
step motor
step motor
step motor
AC-motor
Pos.var.acc-VDI3441(X)
0.006mm
0.003mm
0.003mm
0.003mm
Pos.var.acc-VDI3441(Z)
0.008mm
0.004mm
0.004mm
0.005mm
Rapid traverse X/Z
2m/min (78.74ipm)
5m/min (196.85ipm)
7.5m/min (295.28ipm)
20/24 m/min
Max. feed force X/Z
1000N (224.8lbs)
2000N (449.6lbs)
2500N (562lbs)
4000/6000N
Tool system
programmable turret
programmable turret
programmable+dir.logic
programmable+dir.logic
No of tool holding fixtures
8
8
8 or 10
12
Tool holding fixture
works standard
works standard
VDI16
VDI30
Shaft hei.&wid.-ext. tools
12mm x 12mm
12mm x 12mm
12mm x 12mm
20mm x 20mm
Support bore for inl tools
ø10mm
ø16mm
ø16mm
ø32mm
Drivern tools
12 stat. disk turret
No. of tool holding fixtures
n/a
n/a
0 resp 6
0 resp 6
Power
n/a
n/a
1.2kW (1.61hp)
6.7kW (8.98hp)
Max. torque
n/a
n/a
4Nm (2.95ft/lb)
16Nm (11.79ft/lb)
Speed range
n/a
n/a
200-6000rpm
0-5000rpm
C axis
Resolution
0.01°
0.01°
Rapid speed
100 rpm
100 rpm
Max. torque
25Nm
78Nm
Tailstock
Sleeve stroke
35mm
120mm
120mm
120mm
Quill diameter
22mm
35mm
35mm
60mm
Lubrication device
Guideways
oil lube
central oil lube
central oil lube
central oil lube
Main spindle
lifetime grease lube
lifetime grease lube
lifetime grease lube
lifetime grease lube
Electrical connection
Power supply
115/230V-50/60Hz
230V-50/60Hz
400V-50/60Hz
400V-50/60Hz
Machine connection load
0.85kVA
2.3kVA
5kVA
17kVA
Max. pre-fuse of machine
12A
16A
20A
50A
Safety devices
Enclosed working area
yes
yes
yes
yes
Axis overtravel
yes
yes
yes
yes
Door limit switch
yes
yes
yes
yes
Emergency off switch
CE-complient
CE-complient
CE-complient
CE-complient
Dimensions
Centre height above floor
320mm
267mm
1120m
1152mm
Machine dims LxDxH
840x695x400mm
1135x1100x1030mm
1628x1174x1750mm
2250x1630x1980mm
Weight
85kg
350kg
700kg
3300kg

* : For chuck parts with tailstock.

Technical Data
Concept Mill 55
Concept Mill105
Concept Mill155
Concept Mill300
Working Area
Traverse paths X\Y\Z
190x140x260mm
200x150x250mm
300x200x300
420x330x400mm
Effective Z stroke
120mm (4.72")
150mm (5.91")
200mm (7.87")
240mm (9.45")
Milling Spindle        
Front bearing
roller bearing
spindle type ø40mm
spindle type ø40mm
spindle type ø60mm
Milling table        
Clamping surface LxW
420x125mm
420x125mm
520x180mm
850x325mm
Max. table load
10 kg
10 kg
20 kg
150 kg
T-stations(no\wid\dist)
2/11mm/90mm
2/11mm/90mm
3/12mm/45mm
3/14mm/100mm
Main drive

AsynchronousAC motor
0.75kW(1.01hp)
1.1kW(1.48hp)
2.5/4kW(3.3/5.3hp)
11kW(14.75hp)
Speed range
150-3500/14000rmp
150-5000rpm
150-5000/10000rpm
0-5000/8000rpm
Feed drives
step motor
step motor
step motor
AC-motor
Pos.var.acc-VDI3441(X)
0.006mm
0.003mm
0.003mm
0.004mm
Pos.var.acc-VDI3441(Y)
0.008mm
0.003mm
0.003mm
0.004mm
Pos.var.acc-VDI3441(Z)
0.008mm
0.004mm
0.004mm
0.004mm
Rapid traverse X/Y/Z
2m/min (78.74ipm)
5m/min (196.85ipm)
7.5m/min (295.28ipm)
12 m/min
Max. feed force X/Y/Z
800/800/1000N
2000/2000/2400N
2500N
6000/6000/8800N
Tool system
Tool changer (optional)
Drum turret+dir.logic
Drum turret+dir.logic
Drum turret+dir.logic
No of tool holding fixtures
8
10
10
12
Tool holding fixture
SK 30
SK 30
SK 30
SK 40
Tool tensioning
Automatic
Automatic
Automatic
Automatic
Max. tool weight
1 kg
0.7 kg
0.8 kg
5 kg
Max. tool diameter
40mm.(60mm no changer)
55mm
70mm
100mm
Max. tool length
50mm.(100mm no changer)
50mm
200mm
220mm
C-axis/NC div. attatch.        
Resolution
n/a
n/a
0.01°
0.01°
Max. speed
n/a
n/a
44 rpm
27 rpm
Max. feed torque
n/a
n/a
20 Nm(14.74ft/lb)
80 Nm(58.96ft/lb)
Lubrication device        
Guideways
oil lube
central oil lube
central oil lube
central oil lube
Main spindle
lifetime grease lube
lifetime grease lube
lifetime grease lube
lifetime grease lube
Electrical connection        
Power supply
115/230V-50/60Hz
230V-50/60Hz
400V-50/60Hz
400V-50/60Hz
Machine connection load
0.85kVA
1.4kVA
5kVA
15kVA
Max. pre-fuse of machine
12A
16A
20A
50A
Safety devices        
Enclosed working area
yes
yes
yes
yes
Axis overtravel
yes
yes
yes
yes
Door limit switch
yes
yes
yes
yes
Emergency off switch
CE-complient
CE-complient
CE-complient
CE-complient
Dimensions        
Machine dims LxDxH
960x1000x980mm
1135x1100x1100mm
1502x1284x1925mm
2300x2400x2450mm
Weight
190kg with changer
400kg
700kg
2900kg

PC minimum configuration:
IBM or IBM-compatible : Celeron 700MHz; Hard disk: 10GB; Drives: 3 1/2" floppy, CD-ROM; Main memory: 128MB; Graphics card: 8MB VGA graphics card; Screen: 14" colour monitor; Keyboard: MF-2; Operating system: Windows ,98SE,2000,ME,XP; 1 free USB connection for option keyboard, 1x 10/100 MB LAN card with RJ45 connection.